User Manual

Confidential
Manual Carrier Controller 2020-07-30
SPD6752150121R21_EN.docx Page 2 of 25
The contents of this document are confidential information and intellectual property of Prodrive
Technologies. Nothing of this document may be used or duplicated or published without prior
written approval of Prodrive Technologies.
Document history
Rel.
Date
Status
Changes
R01
2016-12-12
Concept
Initial release manual for internal review.
R02
2016-12-14
Accepted
Updates after internal review, version released for CE approval
R03
2016-12-15
Accepted
Changed short circuit rating to 5kA, added IP54 note for connectors
R04
2016-12-21
Accepted
Removed RCD requirements, PE already ensures protection.
R05
2016-12-29
Accepted
Added LED, added capacitor reforming, added disposal section, added 3
conditions of use (first two and last two)
R06
2017-02-01
Accepted
Updated section 4.2 Mounting (removed horizontal mounting requirement,
added hole numbering). Corrected table 3-3
R07
2017-05-30
Accepted
Updated section 4.2 (removed contact washers, added flat washers)
R08
Concept
Various updates for UL certification.
R09
2017-10-27
Concept
Various updates for UL certification. (Added RCD requirement, external PE
connection to motor and different M12 protection caps),
R10
2018-02-07
Concept
Various updates for UL certification., WIFI -> WLAN, added WLAN channels
R11
2018-06-04
Concept
Various updates for UL certification
R12
2018-08-28
Concept
Update FCC modification notice, Update chapter 7 Radio
R13
18-10-2018
Concept
Added approved antenna list
Updated safety warnings
Updated mounting
Minor changes for safety
R14_rc1
R14_rc2
R14_rc3
R14_rc4
R14_rc5
06-11-2018
19-11-2018
21-11-2018
22-11-2018
22-11-2018
Concept
Updated safety items
Updated safety items
Updated safety items
Updated X108 connection to FE in Figure 4-2
Updated X104 (master) and X104+X105 (slave) circuit to basic insulation
and updated conditions of use.
R14
23-11-2018
Concept
R14 is release of R14_rc5 (see line above)
Used for CB report CER6752150130R01
R15
19-12-2018
Concept
Updated mounted instructions
Added remark to X100 cabling requirements
R16
22-01-2019
Concept
Minor adjustments for regulations
R17
23-01-2019
Concept
Corrected antenna gain added clarification for SWG (Slotted Wave Guide)
R18
05-02-2019
Concept
Minor adjustments for regulations (updated 2 warnings and changed cable
rating to 125V)
R19
04-11-2019
Concept
Extended wireless regulatory in section 7.1.
R20
14-07-2020
Concept
Added regulatory configuration setting
R21
30-07-2020
Concept
Add 2.4GHz channels for CR191014361R03