User's Guide

TI Confidential – NDA Restrictions
www.ti.com FCC and IC Certification and Statement
51
SWRU548A–February 2019–Revised August 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Manual Information to the End User
CAUTION
IC RF Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 cm between the radiator and your body.
Déclaration d'exposition aux radiations:
Cut équipement est conforme aux limites d'exposition aux rayonnements IC
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
This radio transmitter (451I-CC3235MOD) has been approved by Industry Canada to operated with the
antenna types listed in Table 12 of this document with the maximum permissible gain indicated. Antenna
types not included in this list, having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
The antennas listed in Table 12 of this document were verified in the compliance testing. Use only the
antennas listed in Table 12 . A separate approval is required for all other operating configurations,
including different antenna configurations.
A.3.3 End Product Labeling
This module is designed to comply with the FCC statement, FCC ID: Z64-CC3220MOD. The host system
using this module must display a visible label indicating the following text:
• Contains FCC ID: Z64-CC3235MOD
This module is designed to comply with the IC statement, IC: 451I-CC3220MOD. The host system
using this module must display a visible label indicating the following text:
• Contains IC: 451I-CC3235MOD
This module is designed to comply with JP statement 201-190033. The host system using this module
must display a visible label indicating the following text:
• Contains transmitter module with certificate module 201-190033
A.3.4 Device Classifications
Because host devices vary widely with design features and configurations, module integrators shall
reference the following guidelines regarding device classification and simultaneous transmission, and seek
guidance from their preferred regulatory test lab to determine how regulatory guidelines will impact the
device compliance. Proactive management of the regulatory process will minimize unexpected schedule
delays and costs due to unplanned testing activities.
The module integrator must determine the minimum distance required between their host device and the
body of the user. The FCC provides device classification definitions to assist in making the correct
determination. Note that these classifications are guidelines only; strict adherence to a device
classification may not satisfy the regulatory requirement as near-body device design details may vary
widely. The user-preferred test lab will be able to assist in determining the appropriate device category for
the host product and if a KDB or PBA must be submitted to the FCC.
Note, the module that the user is using has been granted modular approval for mobile applications.
Portable applications may require further RF exposure (SAR) evaluations. It is also likely that the host and
module combination will need to undergo testing for FCC Part 15, regardless of the device classification.
The preferred test lab of the user will be able to assist in determining the exact tests which are required on
the host and module combination.