User's Manual
Table Of Contents
www.ti.com
Operation Description
11
SWRU509–February 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
SimpleLink™ Wi-Fi
®
SensorTag
To view the SensorTag on another PC or web browser, use the Share button and share by email (see
Figure 8).
Figure 8. Sharing SensorTag View
3.4 Switching Between Modes
If you would like to repeat the provisioning method, press and hold the user button for 6 seconds to toggle
between station mode (connected to your AP) and AP mode (direct connection to your phone). When in
AP mode, the provisioning process can be repeated.
3.5 Troubleshooting
If you have problems connecting the SensorTag to your access point, use the advanced setup.
Take note of the IP address of the SensorTag (see Figure 9).
Figure 9. Example of SensorTag IP Address