User's Manual

Operation Description www.ti.com
10
SWRU509–February 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
SimpleLink™ Wi-Fi
®
SensorTag
Figure 6. New Device Found
3.3 Connecting the SensorTag to Your Local Wi-Fi Network
On the Sensor View screen, the SensorTag data is displayed (see Figure 7). The default update interval
for the sensor view is 1 second. After 90 seconds of inactivity, the SensorTag emits a short beep and
enters hibernate mode to save power. Press any button to wake up the SensorTag.
Figure 7. SensorTag Sensor Data
To view the sensor data directly in the Cloud, follow the Cloud URL. The SensorTag will now send data
directly to the IBM
®
quickstart cloud using MQTT.
NOTE: These data are sent directly without any security or encryption enabled.