User's Manual

EVM User’s Guide
TI Confidential – Strictly Private 5
2.1 Block Diagram
FTDI
FT2232D
+
SWD circuit
CC3200MOD
USB
Conn
LDO
3.3V
2xAA
Batt Conn
Acc
BMA222
Temp
Sensor
TMP006
Chip
ant
I
2
C
LEDs
GPIO9,10,11
Push buttons
GPIO13, 22
2x20 Launchpad headers
(Compatible with TI MCU Std*)
M25PX80-VMN6TP
W25Q80BLUXIG
VCC
JTAG/SWD
UART (Flashing)
U.FL
Filter
Reverse
Protection
INT(GPIO13)
DC/DC
3.3V
VDD_FLASH
Block Diagram
2.2 Hardware features of the CC3200MOD Launchpad (Evaluation board)
• CC3200MOD Module with CC3200 device with RF filter, serial flash and crystal.
• Low-Power ARM Cortex M4 with 802.11 bgn WIFI
• 40-pin LaunchPad standard that leverages the BoosterPack ecosystem
• FTDI based JTAG emulation with Serial port for flash programming.
• Supports both 4 wire JTAG and 2 wire SWD
• Two buttons and three LEDs for user interaction
• Virtual COM port UART through USB on PC
• On-board chip antenna with U.FL for conducted testing.
• On-board Accelerometer and Temperature sensor for Out of Box demo with option to
isolate them from the I2C bus.
• Micro USB connector for power and debug connections.