User's Manual

EVM User’s Guide
TI Confidential – Strictly Private 3
Getting Started
1.1 Introduction
The CC3200MOD LaunchPad is an easy-to-use evaluation module for the CC3200 WIFI
microcontroller Module. It contains everything needed to start developing on a low-power
Arm Cortex M4F MCU, including onboard emulation for programming and debugging as
well as onboard buttons and LEDs for quick integration of a simple user interface.
The CC3200 supports growing applications with increased CPU speed, memory, and 32-
bit performance.
Rapid prototyping is a snap thanks to the 40-pin headers and a wide variety of
BoosterPack plug-in modules that enable technologies such as , graphical displays,
Audio codec, Antenna diversity, environmental sensing, and much more.
1.2 Key Features
• Low-Power ARM Cortex M4F CC3200MOD module with 802.11 bgn WIFI
• 40-pin LaunchPad standard that leverages the BoosterPack ecosystem
• FTDI based JTAG emulation with Serial port for flash programming.
• Two buttons and three LEDs for user interaction
• Backchannel UART through USB to PC.
• On-board chip antenna with U.FL for conducted testing.
• On-board Accelerometer and Temperature sensor for Out of Box demo.
• Micro USB connector for power and debug connections.