User manual

Hardware Description

www.ti.com

2.1 Block Diagram

Figure 2. CC3200 Block Diagram

2.2 Hardware Features

• CC3200, SimpleLink Wi-Fi, internet-on-a-chip solution with integrated MCU40-pin LaunchPad standard

that leverages the BoosterPack ecosystem

• FTDI-based JTAG emulation with serial port for Flash programming

• Supports both 4-wire JTAG and 2-wire SWD

• Two buttons and three LEDs for user interaction

• Virtual COM port UART through USB on PC

• On-board chip antenna with U.FL for conducted testing

• On-board accelerometer and temperature sensor for out-of-box demo with option to isolate them from

the inter-integrated circuit (I2C) bus

• Micro USB connector for power and debug connections

• Headers for current measurement and external JTAG connection

• Bus-powered device with no external power required for Wi-Fi

• Long range transmission with highly optimized antenna (200m typical in open air with a 6dBi antenna

AP)

• Can be powered externally, with 2xAA or 2xAAA alkaline batteries working down to 2.3V typical (typ)

CC3200 SimpleLink™ Wi-Fi

and IoT Solution with MCU LaunchPad SWRU372–June 2014

Hardware

Submit Documentation Feedback