User manual

Resistor mounted

towards U.FL

Murata connector

Resistor mounted

towards antenna path

Murata

Connector

www.ti.com

Hardware Description

2.7 RF Connections

2.7.1 Radiated Testing (AP connection)

By default the board ships with the RF signals routed to the on-board chip antenna. An on-board u.fl

(Murata) connector provides a means to perform the testing in the lab using a compatible cable.

Figure 13. Radiated Testing Using Chip Antenna

Figure 14. Board Set for Conducted Testing

2.8 Design Files

2.8.1 Hardware

All design files include schematics, layout, Bill of Materials (BOM), Gerber files and documentation, which

are made available for download from the following URL: http://www.ti.com/tool/cc3200-launchxl-rd.

SWRU372–June 2014 CC3200 SimpleLink™ Wi-Fi

and IoT Solution with MCU LaunchPad

Hardware

Submit Documentation Feedback