User manual

www.ti.com

Hardware Description

2.5.1 USB Power

The LaunchPad is designed to work from the USB provided power supply. The LaunchPad will enumerate

as a bus-powered device on the computer. When the board is powered from the USB connector, make

sure that the jumpers are placed on the following headers, as shown in Figure 9.

J12 (shorted)

J13 (shorted)

Figure 9. Powering From USB

SWRU372–June 2014 CC3200 SimpleLink™ Wi-Fi

and IoT Solution with MCU LaunchPad

Hardware

Submit Documentation Feedback