User's Guide

TI Confidential – NDA Restrictions
www.ti.com EU Certification and Statement
7
SWRU549–August 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Manual Information to the End User
3.4 OEM and Host Manufacturer Responsibilities
OEM and host manufacturers are ultimately responsible for the compliance of the host and module. The
final product must be reassessed against all of the essential requirements of the RED before it can be
placed on the EU market. This includes reassessing the transmitter module for compliance with the radio
and EMF essential requirements of the RED. This module must not be incorporated into any other device
or system without retesting for compliance as multi-radio and combined equipment.
3.5 Antenna Specifications
In all cases, assessment of the final product must be met against the Essential requirements of RE
Directive Article 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article 3.3
requirements.
1. The antennas listed in Table 1 were verified in the conformity testing, and for compliance the antenna
shall not be modified. A separate approval is required for all other operating configurations, including
different antenna configurations.
2. If any other simultaneous transmission radio is installed in the host platform together with this module,
or above restrictions cannot be kept, a separate RF exposure assessment and CE equipment
certification is required.
4 CC3x35MOD Approved Antennas
Table 1 lists the antennas approved for use with the CC3135MOD module.
Table 1. CC3x35MOD Approved Antennas
Antenna Information
Brand Antenna Type Model 2.4-GHz Gain 5-GHz Gain
1 Pulse Chip W3078 1.7 4.3
2 Yageo ANT5320LL04R2455A 2.17 3.51
3 Ethertronics M830520 1 2.6
4 PCB 1000423 -0.6 4.5
5 Laird CAF94504 2 4
6 CAF94505 2 4
7 LSR Dipole 001-0012 2 2
8 080-0013 2 2
9 080-0014 2 2
10 PIFA 001-0016 2.5 3
11 001-0021 2.5 3