User's Guide

TI Confidential – NDA Restrictions
Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws and regulations your
product and/or battery shall be disposed of separately from household
waste. When this product reaches its end of life, take it to a collection point
designated by local authorities. Proper recycling of your product will protect
human health and the environment.
FCC and IC Certification and Statement www.ti.com
6
SWRU549–August 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Manual Information to the End User
2.5 FCC Definitions
Portable: (§2.1093)— A portable device is defined as a transmitting device designed to be used so that
the radiating structures of the device is or are within 20 centimeters of the body of the user.
Mobile: (§2.1091) (b)— A mobile device is defined as a transmitting device designed to be used in other
than fixed locations and to generally be used in such a way that a separation distance of at least
20 centimeters is normally maintained between the transmitter’s radiating structures and the body
of the user or nearby persons. Per §2.1091d(d)(4) In some cases (for example, modular or desktop
transmitters), the potential conditions of use of a device may not allow easy classification of that
device as either Mobile or Portable. In these cases, applicants are responsible for determining
minimum distances for compliance for the intended use and installation of the device based on
evaluation of either specific absorption rate (SAR), field strength, or power density, whichever is
most appropriate.
2.6 Simultaneous Transmission Evaluation
This module has not been evaluated or approved for simultaneous transmission as it is impossible to
determine the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous
transmission condition established through module integration into a host product must be evaluated per
the requirements in KDB447498D01(8) and KDB616217D01,D03 (for laptop, notebook, netbook, and
tablet applications).
These requirements include, but are not limited to:
• Transmitters and modules certified for mobile or portable exposure conditions can be incorporated in
mobile host devices without further testing or certification when:
– The closest separation among all simultaneous transmitting antennas is > 20 cm
or
– Antenna separation distance and MPE compliance requirements for ALL simultaneous transmitting
antennas have been specified in the application filing of at least one of the certified transmitters
within the host device. In addition, when transmitters certified for portable use are incorporated in a
mobile host device, the antennas must be > 5 cm from all other simultaneous transmitting antennas
• All antennas in the final product must be at least 20 cm from users and nearby persons.
3 EU Certification and Statement
3.1 RF Exposure Information (MPE)
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. To comply
with the RF exposure requirements, this module must be installed in a host platform that is intended to be
operated in a minimum of 20-cm separation distance to the user.
3.2 Simplified DoC Statement
Hereby, Texas Instruments declares that the radio equipment type CC3135MODRNMMOB is in
compliance with Directive 2014/53/EU.
The full text of the EU declarations of conformity is available at:
• CC3135MODRNMMOB EC Declaration of Conformity (DoC)
3.3 Waste Electrical and Electronic Equipment (WEEE)