User's Manual


separately.Forthis,aUSBconnectorisprovidedontheBoosterPackmoduletoprovidethe3.3V
separately
. 
ThepowersupplyjumpersshouldbeconfiguredasshowninFi gure7‐9whenthepowerissupplied
fromtheon‐boardUSB connector.

Figure7‐9:JumperConfigurationwhenworkingwithLaunchpadkit

NOTE:

Sincetherearetwopowersourcesinthissetup,itisimportanttofollowthepower‐upsequence.
AlwayspowertheBoosterPackmodulebeforepoweringtheLaunchPadkit.





ConnectUSB