User's Manual

EVM User’s Guide
TI Confidential – Strictly Private 7
2.3 Connector and jumper descriptions
2.3.1 Push buttons and LEDs
Push buttons
Reference
Usage
Comments
SW1 OOB Demo This is used as an input for the OOB
demo.
SW2 RESET The use of this pin is optional. This is
used to reset the CC3100 device which
can also be accomplished using the
nHIB button. The RESET completely
erases the CC3100 RAM including the
time.
LEDs
Reference
Colour
Usage
Comments
D5 RED PWR Indication Glows when the 3.3V power is
provided to the board
D1 Yellow nRESET This LED is used to indicate the
stated of nRESET pin. If this LED
is glowing, the device is
functional.
D6 Green nHIB This LED indicates the stated of
nHIB pin. When the LED is OFF,
the device is in hibernate state.
2.3.2 Jumper settings
Reference
Usage
Comments
J21 USB connector For powering the booster pack when
mated with a Launchpad. This is
mandatory to use when using “Z”
devices. For e.g. CC3100HZ
J8
Power selection
Choose the power supply from the