User manual

Cortex-M3 Processor Registers

www.ti.com

2.7.1.27 STIM26 Register (Offset = 68h) [reset = 0h]

STIM26 is shown in Figure 2-30 and described in Table 2-53.

Stimulus Port 26

Figure 2-30. STIM26 Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

STIM26

R/W-0h

Table 2-53. STIM26 Register Field Descriptions

Bit Field Type Reset Description

31-0 STIM26 R/W 0h

A write to this location causes data to be written into the FIFO if

TER.STIMENA26 is set. Reading from the stimulus port returns the

FIFO status in bit [0]: 0 = full, 1 = not full. The polled FIFO interface

does not provide an atomic read-modify-write, so it's users

responsibility to ensure exclusive read-modify-write if this ITM port is

used concurrently by interrupts or other threads.

SWCU117A–February 2015–Revised March 2015

Submit Documentation Feedback