User manual

Factory Configuration (FCFG)

www.ti.com

9.2.1.51 FCFG1_REVISION Register (Offset = 31Ch) [reset = 23h]

FCFG1_REVISION is shown in Figure 9-72 and described in Table 9-74.

Factory Configuration (FCFG1) Revision

Figure 9-72. FCFG1_REVISION Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

REV

R-23h

Table 9-74. FCFG1_REVISION Register Field Descriptions

Bit Field Type Reset Description

31-0 REV R 23h

The revision number of the FCFG1 layout. This value will be read by

application SW in order to determine which FCFG1 parameters that

have valid values. This revision number must be incremented by 1

before any devices are to be produced if the FCFG1 layout has

changed since the previous production of devices.

768

Device Configuration SWCU117A–February 2015–Revised March 2015

Submit Documentation Feedback