User manual

Factory Configuration (FCFG) www.ti.com
9.2.1.49 TRIM_CAL_REVISION Register (Offset = 314h) [reset = 0h]
TRIM_CAL_REVISION is shown in Figure 9-70 and described in Table 9-72.
Production Test Trim and Calibration Revision
Figure 9-70. TRIM_CAL_REVISION Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FT1 MP1
R-0h R-0h
Table 9-72. TRIM_CAL_REVISION Register Field Descriptions
Bit Field Type Reset Description
31-16 FT1 R 0h
The revision of the ATE Trim&Calc document used in FT1 in
production
Reset holds log information from production test.
15-0 MP1 R 0h
The revision of the ATE Trim&Calc document used in MP1 in
production
Reset holds log information from production test.
766
Device Configuration SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated