User manual

Factory Configuration (FCFG)

www.ti.com

9.2.1.33 FLASH_PROG_EP Register (Offset = 188h) [reset = FA00010h]

FLASH_PROG_EP is shown in Figure 9-54 and described in Table 9-56.

Flash Program and Erase Pulse

Figure 9-54. FLASH_PROG_EP Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

MAX_EP PROGRAM_PW

R-FA0h R-10h

Table 9-56. FLASH_PROG_EP Register Field Descriptions

Bit Field Type Reset Description

31-16 MAX_EP R FA0h

Max erase pulse limit per erase operation. Value will be written to

FLASH:FSM_ERA_PUL.MAX_ERA_PUL when an erase/program

operation is initiated.

15-0 PROGRAM_PW R 10h

Program pulse width in half-microseconds. Value will be converted to

number of FCLK cycles by the flash device driver and the converted

value is written to FLASH:FSM_PRG_PW.PROG_PUL_WIDTH

when a erase/program operation is initiated.

748

Device Configuration SWCU117A–February 2015–Revised March 2015

Submit Documentation Feedback