User manual

www.ti.com

Customer Configuration (CCFG)

9.1.1.5 VOLT_LOAD_1 Register (Offset = FBCh) [reset = FFFFFFFFh]

VOLT_LOAD_1 is shown in Figure 9-5 and described in Table 9-6.

Voltage Load 1 Enabled by MODE_CONF.VDDR_EXT_LOAD.

Figure 9-5. VOLT_LOAD_1 Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

VDDR_EXT_TP125 VDDR_EXT_TP105

R/W-FFh R/W-FFh

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

VDDR_EXT_TP85 VDDR_EXT_TP65

R/W-FFh R/W-FFh

Table 9-6. VOLT_LOAD_1 Register Field Descriptions

Bit Field Type Reset Description

31-24 VDDR_EXT_TP125 R/W FFh

Reserved for future use. Software should not rely on the value of a

reserved. Writing any other value than the reset/default value may

result in undefined behavior.

23-16 VDDR_EXT_TP105 R/W FFh

Reserved for future use. Software should not rely on the value of a

reserved. Writing any other value than the reset/default value may

result in undefined behavior.

15-8 VDDR_EXT_TP85 R/W FFh

Reserved for future use. Software should not rely on the value of a

reserved. Writing any other value than the reset/default value may

result in undefined behavior.

7-0 VDDR_EXT_TP65 R/W FFh

Reserved for future use. Software should not rely on the value of a

reserved. Writing any other value than the reset/default value may

result in undefined behavior.

693

SWCU117A–February 2015–Revised March 2015 Device Configuration

Submit Documentation Feedback