User manual

www.ti.com VIMS Registers
7.7.2.2 CFG Register (Offset = 24h) [reset = X]
CFG is shown in Figure 7-12 and described in Table 7-9.
Internal. Only to be used through TI provided API.
Figure 7-12. CFG Register
31 30 29 28 27 26 25 24
RESERVED
R/W-X
23 22 21 20 19 18 17 16
RESERVED
R/W-X
15 14 13 12 11 10 9 8
RESERVED STANDBY_MO
DE_SEL
R/W-X R/W-X
7 6 5 4 3 2 1 0
STANDBY_PW_SEL DIS_EFUSECL DIS_READACC ENABLE_SWIN RESERVED DIS_STANDBY DIS_IDLE
K ESS TF
R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X
Table 7-9. CFG Register Field Descriptions
Bit Field Type Reset Description
31-9 RESERVED R/W X
Internal. Only to be used through TI provided API.
8 STANDBY_MODE_SEL R/W X
Internal. Only to be used through TI provided API.
7-6 STANDBY_PW_SEL R/W X
Internal. Only to be used through TI provided API.
5 DIS_EFUSECLK R/W X
Internal. Only to be used through TI provided API.
4 DIS_READACCESS R/W X
Internal. Only to be used through TI provided API.
3 ENABLE_SWINTF R/W X
Internal. Only to be used through TI provided API.
2 RESERVED R/W X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
1 DIS_STANDBY R/W X
Internal. Only to be used through TI provided API.
0 DIS_IDLE R/W X
Internal. Only to be used through TI provided API.
547
SWCU117A–February 2015–Revised March 2015 Versatile Instruction Memory System (VIMS)
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated