User manual

PRCM Registers www.ti.com
6.2.4.6 AMPCOMPTH2 Register (Offset = 14h) [reset = X]
AMPCOMPTH2 is shown in Figure 6-86 and described in Table 6-91.
Amplitude Compensation Threashold 2 This register contains various threshhold values for amplitude
compensation algorithm.
Figure 6-86. AMPCOMPTH2 Register
31 30 29 28 27 26 25 24
LPMUPDATE_LTH SPARE24
R/W-X R/W-X
23 22 21 20 19 18 17 16
LPMUPDATE_HTH SPARE16
R/W-X R/W-X
15 14 13 12 11 10 9 8
ADC_COMP_AMPTH_LPM SPARE8
R/W-X R/W-X
7 6 5 4 3 2 1 0
ADC_COMP_AMPTH_HPM SPARE0
R/W-X R/W-X
Table 6-91. AMPCOMPTH2 Register Field Descriptions
Bit Field Type Reset Description
31-26 LPMUPDATE_LTH R/W X
Internal. Only to be used through TI provided API.
25-24 SPARE24 R/W X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
23-18 LPMUPDATE_HTH R/W X
Internal. Only to be used through TI provided API.
17-16 SPARE16 R/W X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
15-10 ADC_COMP_AMPTH_LP R/W X
Internal. Only to be used through TI provided API.
M
9-8 SPARE8 R/W X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
7-2 ADC_COMP_AMPTH_HP R/W X
Internal. Only to be used through TI provided API.
M
1-0 SPARE0 R/W X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
516
Power, Reset, and Clock Management SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated