User manual

www.ti.com PRCM Registers
6.2.4.5 AMPCOMPTH1 Register (Offset = 10h) [reset = X]
AMPCOMPTH1 is shown in Figure 6-85 and described in Table 6-90.
Amplitude Compensation Threashold 1 This register contains various threshhold values for amplitude
compensation algorithm
Figure 6-85. AMPCOMPTH1 Register
31 30 29 28 27 26 25 24
SPARE24
R/W-X
23 22 21 20 19 18 17 16
HPMRAMP3_LTH SPARE16
R/W-X R/W-X
15 14 13 12 11 10 9 8
HPMRAMP3_HTH IBIASCAP_LPTOHP_OL_CNT
R/W-X R/W-X
7 6 5 4 3 2 1 0
IBIASCAP_LPTOHP_OL_CNT HPMRAMP1_TH
R/W-X R/W-X
Table 6-90. AMPCOMPTH1 Register Field Descriptions
Bit Field Type Reset Description
31-24 SPARE24 R/W X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
23-18 HPMRAMP3_LTH R/W X
Internal. Only to be used through TI provided API.
17-16 SPARE16 R/W X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
15-10 HPMRAMP3_HTH R/W X
Internal. Only to be used through TI provided API.
9-6 IBIASCAP_LPTOHP_OL_ R/W X
Internal. Only to be used through TI provided API.
CNT
5-0 HPMRAMP1_TH R/W X
Internal. Only to be used through TI provided API.
515
SWCU117A–February 2015–Revised March 2015 Power, Reset, and Clock Management
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated