User manual

ManualsBrandsTEXAS INSTRUMENTS ManualsDev KitsPCB design board

511

512

513

514

515

516

517

518

519

520

PRCM Registers

www.ti.com

6.2.4.4 AMPCOMPCTL Register (Offset = Ch) [reset = X]

AMPCOMPCTL is shown in Figure 6-84 and described in Table 6-89.

Amplitude Compensation Control

Figure 6-84. AMPCOMPCTL Register

31 30 29 28 27 26 25 24

SPARE31 AMPCOMP_RE AMPCOMP_FSM_UPDATE_RA AMPCOMP_S AMPCOMP_S RESERVED

Q_MODE TE W_CTRL W_EN

R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X

23 22 21 20 19 18 17 16

IBIAS_OFFSET IBIAS_INIT

R/W-X R/W-X

15 14 13 12 11 10 9 8

LPM_IBIAS_WAIT_CNT_FINAL

R/W-X

7 6 5 4 3 2 1 0

CAP_STEP IBIASCAP_HPTOLP_OL_CNT

R/W-X R/W-X

Table 6-89. AMPCOMPCTL Register Field Descriptions

Bit Field Type Reset Description

31 SPARE31 R/W X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

30 AMPCOMP_REQ_MODE R/W X

Internal. Only to be used through TI provided API.

29-28 AMPCOMP_FSM_UPDAT R/W X

Internal. Only to be used through TI provided API.

E_RATE

0h = 2MHZ : Internal. Only to be used through TI provided API.

1h = 1MHZ : Internal. Only to be used through TI provided API.

2h = 500KHZ : Internal. Only to be used through TI provided API.

3h = 250KHZ : Internal. Only to be used through TI provided API.

27 AMPCOMP_SW_CTRL R/W X

Internal. Only to be used through TI provided API.

26 AMPCOMP_SW_EN R/W X

Internal. Only to be used through TI provided API.

25-24 RESERVED R/W X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

23-20 IBIAS_OFFSET R/W X

Internal. Only to be used through TI provided API.

19-16 IBIAS_INIT R/W X

Internal. Only to be used through TI provided API.

15-8 LPM_IBIAS_WAIT_CNT_ R/W X

Internal. Only to be used through TI provided API.

FINAL

7-4 CAP_STEP R/W X

Internal. Only to be used through TI provided API.

3-0 IBIASCAP_HPTOLP_OL_ R/W X

Internal. Only to be used through TI provided API.

CNT

514

Power, Reset, and Clock Management SWCU117A–February 2015–Revised March 2015

Submit Documentation Feedback