User manual

PRCM Registers www.ti.com
6.2.1.41 PDCTL0PERIPH Register (Offset = 138h) [reset = X]
PDCTL0PERIPH is shown in Figure 6-47 and described in Table 6-49.
PERIPH Power Domain Control
Figure 6-47. PDCTL0PERIPH Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RESERVED
R-X
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESERVED ON
R-X R/W-X
Table 6-49. PDCTL0PERIPH Register Field Descriptions
Bit Field Type Reset Description
31-1 RESERVED R X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
0 ON R/W X
Alias for PDCTL0.PERIPH_ON
470
Power, Reset, and Clock Management SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated