User manual

www.ti.com

Interrupts and Events Registers

Table 4-12. AUXWUSEL Register Field Descriptions (continued)

Bit Field Type Reset Description

28h = RTC channel 2 - delayed event

29h = RTC combined delayed event

2Ah = RTC Update Tick (16 kHz signal, i.e. event line toggles value

every 32 kHz clock period)

2Bh = JTAG generated event

2Ch = AUX Software triggered event #0. Triggered by

AUX_EVCTL:SWEVSET.SWEV0

2Dh = AUX Software triggered event #1. Triggered by

AUX_EVCTL:SWEVSET.SWEV1

2Eh = AUX Software triggered event #2. Triggered by

[AUX_EVCTL.SWEVSET.SWEV2]

2Fh = Comparator A triggered

30h = Comparator B triggered

31h = ADC conversion completed

32h = TDC completed or timed out

33h = Timer 0 event

34h = Timer 1 event

35h = BATMON temperature update event

36h = BATMON voltage update event

37h = Comparator B triggered. Asynchronous signal directly from the

AUX Comparator B as opposed to AUX_COMPB which is

synchronized in AUX

38h = Comparator B not triggered. Asynchronous signal directly from

**AUX ** Comparator B (inverted) as opposed to AUX_COMPB

which is synchronized in AUX

3Fh = No event, always low

7-6 RESERVED R X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

257

SWCU117A–February 2015–Revised March 2015 Interrupts and Events

Submit Documentation Feedback