User manual

www.ti.com MCU Event Fabric
Table 4-8. MCU Event Fabric Input Events (continued)
Event No. Event Enum. Description
0x43 GPT3A_CMP GPT3A compare event. Configured by [GPT3:TAMR.TCACT].
0x44 GPT3B_CMP GPT3B compare event. Configured by [GPT3:TBMR.TCACT].
0x45 TIE_LOW Not used; tied to 0
0x46 TIE_LOW Not used; tied to 0
0x47 TIE_LOW Not used; tied to 0
0x48 TIE_LOW Not used; tied to 0
0x49 TIE_LOW Not used; tied to 0
0x4A TIE_LOW Not used; tied to 0
0x4B TIE_LOW Not used; tied to 0
0x4C TIE_LOW Not used; tied to 0
0x4D GPT0A_DMABREQ GPT 0A DMA trigger event. Configured by [GPT0:DMAEV.*].
0x4E GPT0B_DMABREQ GPT 0B DMA trigger event. Configured by [GPT0:DMAEV.*].
0x4F GPT1A_DMABREQ GPT 1A DMA trigger event. Configured by [GPT1:DMAEV.*].
0x50 GPT1B_DMABREQ GPT 1B DMA trigger event. Configured by [GPT1:DMAEV.*].
0x51 GPT2A_DMABREQ GPT 2A DMA trigger event. Configured by [GPT2:DMAEV.*].
0x52 GPT2B_DMABREQ GPT 2B DMA trigger event. Configured by [GPT2:DMAEV.*].
0x53 GPT3A_DMABREQ GPT 3A DMA trigger event. Configured by [GPT3:DMAEV.*].
0x54 GPT3B_DMABREQ GPT 3B DMA trigger event. Configured by [GPT3:DMAEV.*].
Port capture event from IOC, configured by [IOC:IOCFGn.PORT_ID].
0x55 PORT_EVENT0 Events on ports configured with **ENUM** **PORT_EVENT0** will be
routed here.
Port capture event from IOC, configured by [IOC:IOCFGn.PORT_ID].
0x56 PORT_EVENT1
Events on ports configured with PORT_EVENT1 will be routed here.
Port capture event from IOC, configured by [IOC:IOCFGn.PORT_ID].
0x57 PORT_EVENT2
Events on ports configured with PORT_EVENT2 will be routed here.
Port capture event from IOC, configured by [IOC:IOCFGn.PORT_ID].
0x58 PORT_EVENT3
Events on ports configured with PORT_EVENT3 will be routed here.
Port capture event from IOC, configured by [IOC:IOCFGn.PORT_ID].
0x59 PORT_EVENT4 Events on ports configured with ENUM PORT_EVENT4 will be routed
here.
Port capture event from IOC, configured by [IOC:IOCFGn.PORT_ID].
0x5A PORT_EVENT5
Events on ports configured with PORT_EVENT4 will be routed here.
Port capture event from IOC, configured by [IOC:IOCFGn.PORT_ID].
0x5B PORT_EVENT6
Events on ports configured with PORT_EVENT6 will be routed here.
Port capture event from IOC, configured by [IOC:IOCFGn.PORT_ID].
0x5C PORT_EVENT7
Events on ports configured with PORT_EVENT7 will be routed here.
CRYPTO result available interrupt event, the corresponding flag is found
0x5D CRYPTO_RESULT_AVAIL_IRQ here [CRYPTO:IRQSTAT.RESULT_AVAIL]. Controlled by
[CRYPTO:IRQSTAT.RESULT_AVAIL]
CRYPTO DMA input done event, the corresponding flag is
0x5E CRYPTO_DMA_DONE_IRQ [CRYPTO:IRQSTAT.DMA_IN_DONE]. Controlled by
[CRYPTO:IRQEN.DMA_IN_DONE]
0x5F RFC_IN_EV4 RFC RAT event 4, configured by [RFC_RAT:RATEV.OEVT4]
0x60 RFC_IN_EV5 RFC RAT event 5, configured by [RFC_RAT:RATEV.OEVT5]
0x61 RFC_IN_EV6 RFC RAT event 6, configured by [RFC_RAT:RATEV.OEVT6]
0x62 RFC_IN_EV7 RFC RAT event 7, configured by [RFC_RAT:RATEV.OEVT7]
WATCHDOG nonmaskable interrupt event, controlled by
0x63 WDT_NMI
[WDT:CTL.INTTYPE]
0x64 SWEV0 Software event 0, triggered by [SWEV.SWEV0]
0x65 SWEV1 Software event 1, triggered by [SWEV.SWEV1]
0x66 SWEV2 Software event 2, triggered by [SWEV.SWEV2]
0x67 SWEV3 Software event 3, triggered by [SWEV.SWEV3]
243
SWCU117A–February 2015–Revised March 2015 Interrupts and Events
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated