User manual

Radio Registers www.ti.com
Table 23-138. RFCPEISL Register Field Descriptions (continued)
Bit Field Type Reset Description
11 TX_BUFFER_CHANGED R/W X
Select which CPU interrupt vector the
RFCPEIFG.TX_BUFFER_CHANGED interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
10 TX_ENTRY_DONE R/W X
Select which CPU interrupt vector the
RFCPEIFG.TX_ENTRY_DONE interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
9 TX_RETRANS R/W X
Select which CPU interrupt vector the RFCPEIFG.TX_RETRANS
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
8 TX_CTRL_ACK_ACK R/W X
Select which CPU interrupt vector the
RFCPEIFG.TX_CTRL_ACK_ACK interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
7 TX_CTRL_ACK R/W X
Select which CPU interrupt vector the RFCPEIFG.TX_CTRL_ACK
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
6 TX_CTRL R/W X
Select which CPU interrupt vector the RFCPEIFG.TX_CTRL
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
5 TX_ACK R/W X
Select which CPU interrupt vector the RFCPEIFG.TX_ACK interrupt
should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
4 TX_DONE R/W X
Select which CPU interrupt vector the RFCPEIFG.TX_DONE
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
3 LAST_FG_COMMAND_D R/W X
Select which CPU interrupt vector the
ONE
RFCPEIFG.LAST_FG_COMMAND_DONE interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
2 FG_COMMAND_DONE R/W X
Select which CPU interrupt vector the
RFCPEIFG.FG_COMMAND_DONE interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
1 LAST_COMMAND_DONE R/W X
Select which CPU interrupt vector the
RFCPEIFG.LAST_COMMAND_DONE interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
0 COMMAND_DONE R/W X
Select which CPU interrupt vector the
RFCPEIFG.COMMAND_DONE interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
1560
Radio SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated