User manual
www.ti.com
Radio Registers
Table 23-138. RFCPEISL Register Field Descriptions (continued)
Bit Field Type Reset Description
24 RX_DATA_WRITTEN R/W 1h
Select which CPU interrupt vector the
RFCPEIFG.RX_DATA_WRITTEN interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
23 RX_ENTRY_DONE R/W 1h
Select which CPU interrupt vector the
RFCPEIFG.RX_ENTRY_DONE interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
22 RX_BUF_FULL R/W 1h
Select which CPU interrupt vector the RFCPEIFG.RX_BUF_FULL
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
21 RX_CTRL_ACK R/W 1h
Select which CPU interrupt vector the RFCPEIFG.RX_CTRL_ACK
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
20 RX_CTRL R/W 1h
Select which CPU interrupt vector the RFCPEIFG.RX_CTRL
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
19 RX_EMPTY R/W 1h
Select which CPU interrupt vector the RFCPEIFG.RX_EMPTY
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
18 RX_IGNORED R/W 1h
Select which CPU interrupt vector the RFCPEIFG.RX_IGNORED
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
17 RX_NOK R/W 1h
Select which CPU interrupt vector the RFCPEIFG.RX_NOK interrupt
should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
16 RX_OK R/W 1h
Select which CPU interrupt vector the RFCPEIFG.RX_OK interrupt
should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
15 IRQ15 R/W X
Select which CPU interrupt vector the RFCPEIFG.IRQ15 interrupt
should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
14 IRQ14 R/W X
Select which CPU interrupt vector the RFCPEIFG.IRQ14 interrupt
should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
13 IRQ13 R/W X
Select which CPU interrupt vector the RFCPEIFG.IRQ13 interrupt
should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
12 BG_COMMAND_SUSPE R/W X
Select which CPU interrupt vector the
NDED
RFCPEIFG.BG_COMMAND_SUSPENDED interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
1559
SWCU117A–February 2015–Revised March 2015 Radio
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated