User manual

Radio Registers www.ti.com
23.7.1.7 RFCPEISL Register (Offset = 18h) [reset = X]
RFCPEISL is shown in Figure 23-15 and described in Table 23-138.
Interrupt Vector Selection For Command and Packet Engine Generated Interrupts
Figure 23-15. RFCPEISL Register
31 30 29 28 27 26 25 24
INTERNAL_ER BOOT_DONE MODULES_UN SYNTH_NO_L IRQ27 RX_ABORTED RX_N_DATA_ RX_DATA_WRI
ROR LOCKED OCK WRITTEN TTEN
R/W-1h R/W-1h R/W-1h R/W-1h R/W-1h R/W-1h R/W-1h R/W-1h
23 22 21 20 19 18 17 16
RX_ENTRY_D RX_BUF_FULL RX_CTRL_AC RX_CTRL RX_EMPTY RX_IGNORED RX_NOK RX_OK
ONE K
R/W-1h R/W-1h R/W-1h R/W-1h R/W-1h R/W-1h R/W-1h R/W-1h
15 14 13 12 11 10 9 8
IRQ15 IRQ14 IRQ13 BG_COMMAN TX_BUFFER_C TX_ENTRY_D TX_RETRANS TX_CTRL_ACK
D_SUSPENDE HANGED ONE _ACK
D
R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X
7 6 5 4 3 2 1 0
TX_CTRL_ACK TX_CTRL TX_ACK TX_DONE LAST_FG_CO FG_COMMAN LAST_COMMA COMMAND_D
MMAND_DON D_DONE ND_DONE ONE
E
R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X R/W-X
Table 23-138. RFCPEISL Register Field Descriptions
Bit Field Type Reset Description
31 INTERNAL_ERROR R/W 1h
Select which CPU interrupt vector the
RFCPEIFG.INTERNAL_ERROR interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
30 BOOT_DONE R/W 1h
Select which CPU interrupt vector the RFCPEIFG.BOOT_DONE
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
29 MODULES_UNLOCKED R/W 1h
Select which CPU interrupt vector the
RFCPEIFG.MODULES_UNLOCKED interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
28 SYNTH_NO_LOCK R/W 1h
Select which CPU interrupt vector the
RFCPEIFG.SYNTH_NO_LOCK interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
27 IRQ27 R/W 1h
Select which CPU interrupt vector the RFCPEIFG.IRQ27 interrupt
should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
26 RX_ABORTED R/W 1h
Select which CPU interrupt vector the RFCPEIFG.RX_ABORTED
interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
25 RX_N_DATA_WRITTEN R/W 1h
Select which CPU interrupt vector the
RFCPEIFG.RX_N_DATA_WRITTEN interrupt should use.
0h = Associate this interrupt line with INT_RF_CPE0 interrupt vector
1h = Associate this interrupt line with INT_RF_CPE1 interrupt vector
1558
Radio SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated