User manual

www.ti.com

Radio Registers

Table 23-134. RFHWIFG Register Field Descriptions (continued)

Bit Field Type Reset Description

4 MDMOUT R/W X

Modem FIFO output interrupt flag. Write zero to clear flag. Write to

one has no effect.

3 MDMIN R/W X

Modem FIFO input interrupt flag. Write zero to clear flag. Write to

one has no effect.

2 MDMDONE R/W X

Modem command done interrupt flag. Write zero to clear flag. Write

to one has no effect.

1 FSCA R/W X

Frequency synthesizer calibration accelerator interrupt flag. Write

zero to clear flag. Write to one has no effect.

0 RESERVED R/W X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

1551

SWCU117A–February 2015–Revised March 2015 Radio

Submit Documentation Feedback