User manual

ManualsBrandsTEXAS INSTRUMENTS ManualsDev KitsPCB design board

1521

Bluetooth Low Energy

www.ti.com

Table 23-99. Initiator Command (continued)

Bytes Field Name Type Description

2–3 nRxAdvIgnored R/W Number of ADV*_IND packets received with CRC OK, but ignored

4–5 nRxAdvNok R/W Number of ADV*_IND packets received with CRC error

Number of ADV*_IND packets received that did not fit in RX

6 nRxAdvBufFull R/W

queue

7 lastRssi R/W The RSSI of the last received packet

Time stamp of the received ADV*_IND packet that caused

8–11 timeStamp R

transmission of CONNECT_REQ

Table 23-100. Generic RX Command

Bytes Field Name Type Description

0–1 nRxOk R/W Number of packets received with CRC OK

2–3 nRxNok R/W Number of packets received with CRC error

Number of packets that have been received and discarded due to

4–5 nRxBufFull R/W

lack of buffer space

6 lastRssi R The RSSI of the last received packet

7 Reserved

8–11 timeStamp R Time stamp of the last received packet

Table 23-101. Test TX Command

Bytes Field Name Type Description

0–1 nTx R/W Number of packets transmitted

23.6.1.4 Other Structures and Bit Fields

Table 23-102. Receive Queue Entry Configuration Bit Field

(1)

Bits Bit Field Name Description

0 bAutoFlushIgnored If 1, automatically remove ignored packets from RX queue

1 bAutoFlushCrcErr If 1, automatically remove packets with CRC error from RX queue

2 bAutoFlushEmpty If 1, automatically remove empty packets from RX queue

If 1, include the received length byte in the stored packet; otherwise discard

3 bIncludeLenByte

If 1, include the received CRC field in the stored packet; otherwise discard

4 bIncludeCrc

5 bAppendRssi If 1, append an RSSI byte to the packet in the RX queue

6 bAppendStatus If 1, append a status byte to the packet in the RX queue

7 bAppendTimestamp If 1, append a timestamp to the packet in the RX queue

(1)

This bit field is used for the RXConfig byte of the parameter structures.

Table 23-103. Sequence Number Status Bit Field

Bits Bit Field Name Description

0 lastRxSn The SN bit of the header of the last packet received with CRC OK

1 lastTxSn The SN bit of the header of the last transmitted packet

2 nextTxSn The SN bit of the header of the next packet to transmit

For slave: 0 if a packet has been transmitted on the connection, 1

3 bFirstPkt

otherwise

4 bAutoEmpty 1 if the last transmitted packet was an ato-empty packet

1522

Radio SWCU117A–February 2015–Revised March 2015

Submit Documentation Feedback