User manual

www.ti.com Bluetooth Low Energy
Table 23-92. Scanner Command (continued)
Bytes Field Name Bits Bit Field Name Type Description
24–25 Reserved
Trigger that causes the device to stop
26 timeoutTrigger W
receiving as soon as allowed
Trigger that causes the device to stop
27 endTrigger W
receiving as soon as allowed
28–31 timeoutTime W Time parameter for timeoutTrigger
32–35 endTime W Time parameter for endTrigger
Table 23-93. Initiator Command
Bytes Field Name Bits Bit Field Name Type Description
0–3 pRxQ W Pointer to receive queue
Configuration bits for the receive queue
4 rxConfig W
entries (see Table 23-102 for details)
Initiator filter policy
0 bUseWhiteList W 0: Use specific peer address. 1: Use white
list
1 bDynamicWinOffset W 1: Use dynamic WinOffset insertion
5 initConfig The type of the device address – public (0)
2 deviceAddrType W
or random (1)
The type of the peer device address –
3 peerAddrType W
public (0) or random (1)
4 bStrictLenFilter W 1: Discard messages with illegal length
6 Reserved
7 connectReqLen W Size of connect request data
pConnectReqDat Pointer to buffer containing LLData to go in
8–11 W
a the CONNECT_REQ
Pointer to device address used for this
12–15 pDeviceAddress W
device
16–19 pWhiteList W Pointer to white list or peer address
Indication of timer value of the first possible
start time of the first connection event. Set
to the calculated value if a connection is
20–23 connectTime R/W
made and to the next possible connection
time (see Table 23-99, Initiator Command)
if not.
24–25 Reserved
Trigger that causes the device to stop
26 timeoutTrigger W
receiving as soon as allowed
Trigger that causes the device to stop
27 endTrigger W
receiving as soon as allowed
28–31 timeoutTime W Time parameter for timeoutTrigger
32–35 endTime W Time parameter for endTrigger
Table 23-94. Generic RX Command
Bytes Field Name Type Description
0–3 pRxQ W Pointer to receive queue. May be NULL; if so,
received packets are not stored
4 rxConfig W Configuration bits for the receive queue entries
(see Table 23-102 for details)
5 bRepeat W 0: End operation after receiving a packet. 1:
Restart receiver after receiving a packet
6–7 Reserved
1519
SWCU117A–February 2015–Revised March 2015 Radio
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated