User manual

Bluetooth Low Energy www.ti.com
Table 23-91. Advertiser Commands
Bytes Field Name Bits Bit Field Name Type Description
0–3 pRxQ W Pointer to receive queue
Configuration bits for the receive queue
4 rxConfig W
entries (see Table 23-102 for details)
0–1 advFilterPolicy W The advertiser filter policy
The type of the device address – public (0)
2 deviceAddrType W
or random (1)
5 advConfig
Directed advertiser: The type of the peer
3 peerAddrType W
address – public (0) or random (1)
4 bStrictLenFilter W 1: Discard messages with illegal length
6 advLen W Size of advertiser data
7 scanRspLen W Size of scan response data
8–11 pAdvData W Pointer to buffer containing ADV*_IND data
12–15 pScanRspData W Pointer to buffer containing SCAN_RSP data
Pointer to device address used for this
16–19 pDeviceAddress W
device
Pointer to white list or peer address
20–23 pWhiteList W
(directed advertiser)
24–26 Reserved
Trigger that causes the device to end the
27 endTrigger W
advertiser event as soon as allowed
28–31 endTime W Time parameter for endTrigger
Table 23-92. Scanner Command
Bytes Field Name Bits Bit Field Name Type Description
0–3 pRxQ W Pointer to receive queue
Configuration bits for the receive queue
4 rxConfig W
entries (see Table 23-102 for details)
0 scanFilterPolicy W The scanner filter policy
0: Passive scan
1 bActiveScan W
1: Active scan
The type of the device address – public (0)
2 deviceAddrType W
or random (1)
5 scanConfig
3 Reserved
4 bStrictLenFilter W 1: Discard messages with illegal length
5 bAutoWlIgnore W 1: Automatically set ignore bit in white list
1: End scanner operation after each reported
6 bEndOnRpt W
ADV*_IND and potentially SCAN_RSP
State for pseudo-random number generation
6–7 randomState R/W
used in backoff procedure
Parameter backoffCount used in backoff
8–9 backoffCount R/W
procedure
Binary logarithm of parameter upperLimit
0–3 logUpperLimit R/W
used in scanner backoff procedure
1 if the last SCAN_RSP was successfully
10 backoffPar 4 bLastSucceeded R/W
received and upperLimit not changed
1 if reception of the last SCAN_RSP failed
5 bLastFailed R/W
and upperLimit was not changed
11 scanReqLen W Size of scan request data
12–15 pScanReqData W Pointer to buffer containing SCAN_REQ data
Pointer to device address used for this
16–19 pDeviceAddress W
device
20–23 pWhiteList W Pointer to white list
1518
Radio SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated