User manual

BATMON Registers www.ti.com
18.3.1.13 TEMPUPD Register (Offset = 34h) [reset = X]
TEMPUPD is shown in Figure 18-13 and described in Table 18-14.
Temperature Update Indicates TEMP Updates
Figure 18-13. TEMPUPD Register
31 30 29 28 27 26 25 24
RESERVED
R-X
23 22 21 20 19 18 17 16
RESERVED
R-X
15 14 13 12 11 10 9 8
RESERVED
R-X
7 6 5 4 3 2 1 0
RESERVED STAT
R-X R/W1C-X
Table 18-14. TEMPUPD Register Field Descriptions
Bit Field Type Reset Description
31-1 RESERVED R X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
0 STAT R/W1C X
0: No update since last clear 1: New temperature is present. Write 1
to clear the status.
1326
Battery Monitor and Temperature Sensor SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated