User manual

AUX – Sensor Controller Registers

www.ti.com

17.8.5.3 T0CTL Register (Offset = 8h) [reset = X]

T0CTL is shown in Figure 17-52 and described in Table 17-74.

Timer 0 Control Run control/status for timer 0

Figure 17-52. T0CTL Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

RESERVED

R-X

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RESERVED EN

R-X R/W-X

Table 17-74. T0CTL Register Field Descriptions

Bit Field Type Reset Description

31-1 RESERVED R X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

0 EN R/W X

Timer 0 run enable control. The counter restarts when enabling the

timer. If T0CFG.RELOAD = 0, the timer is automatically disabled

when reaching T0TARGET.VALUE 0: Disable timer 0 1: Enable

timer 0

1278

AUX – Sensor Controller with Digital and Analog Peripherals SWCU117A–February 2015–Revised March 2015

Submit Documentation Feedback