User manual

AUX – Sensor Controller Registers www.ti.com
17.8.3.7 SWEVSET Register (Offset = 18h) [reset = X]
SWEVSET is shown in Figure 17-26 and described in Table 17-46.
Software Event Set Strobes for setting software events from the AUX domain to the AON/MCU Domains
The use of these events is software-defined.
Figure 17-26. SWEVSET Register
31 30 29 28 27 26 25 24
RESERVED
R-X
23 22 21 20 19 18 17 16
RESERVED
R-X
15 14 13 12 11 10 9 8
RESERVED
R-X
7 6 5 4 3 2 1 0
RESERVED SWEV2 SWEV1 SWEV0
R-X W-X W-X W-X
Table 17-46. SWEVSET Register Field Descriptions
Bit Field Type Reset Description
31-3 RESERVED R X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
2 SWEV2 W X
Writing 1 sets software event 2. For the MCU domain, the event flag
can be read from EVTOAONFLAGS.SWEV2 and cleared using
EVTOAONFLAGSCLR.SWEV2.
1 SWEV1 W X
Writing 1 sets software event 1. For the MCU domain, the event flag
can be read from EVTOAONFLAGS.SWEV1 and cleared using
EVTOAONFLAGSCLR.SWEV1.
0 SWEV0 W X
Writing 1 sets software event 0. For the MCU domain, the event flag
can be read from EVTOAONFLAGS.SWEV0 and cleared using
EVTOAONFLAGSCLR.SWEV0.
1246
AUX – Sensor Controller with Digital and Analog Peripherals SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated