User manual

www.ti.com AUX – Sensor Controller Registers
17.8.3.4 EVTOAONFLAGS Register (Offset = Ch) [reset = X]
EVTOAONFLAGS is shown in Figure 17-23 and described in Table 17-43.
Events To AON Domain Flags AUX event flags going to/through the AON domain These events may be
used to wake up the MCU domain. The flags may be cleared by writing 0 to these bits or writing 1 to the
corresponding bits in EVTOAONFLAGSCLR.
Figure 17-23. EVTOAONFLAGS Register
31 30 29 28 27 26 25 24
RESERVED
R-X
23 22 21 20 19 18 17 16
RESERVED
R-X
15 14 13 12 11 10 9 8
RESERVED TIMER1_EV
R-X zeroToClear-X
7 6 5 4 3 2 1 0
TIMER0_EV TDC_DONE ADC_DONE AUX_COMPB AUX_COMPA SWEV2 SWEV1 SWEV0
zeroToClear-X zeroToClear-X zeroToClear-X zeroToClear-X zeroToClear-X zeroToClear-X zeroToClear-X zeroToClear-X
Table 17-43. EVTOAONFLAGS Register Field Descriptions
Bit Field Type Reset Description
31-9 RESERVED R X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
8 TIMER1_EV zeroToClear X
TIMER1_EV event flag.
7 TIMER0_EV zeroToClear X
TIMER0_EV event flag.
6 TDC_DONE zeroToClear X
TDC_DONE event flag.
5 ADC_DONE zeroToClear X
ADC_DONE event flag.
4 AUX_COMPB zeroToClear X
AUX_COMPB event flag.
3 AUX_COMPA zeroToClear X
AUX_COMPA event flag.
2 SWEV2 zeroToClear X
SWEV2 event flag.
1 SWEV1 zeroToClear X
SWEV1 event flag.
0 SWEV0 zeroToClear X
SWEV0 event flag.
1243
SWCU117A–February 2015–Revised March 2015 AUX – Sensor Controller with Digital and Analog Peripherals
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated