User manual

www.ti.com

AUX – Sensor Controller Registers

17.8.2.8 TRIGCNTCFG Register (Offset = 1Ch) [reset = X]

TRIGCNTCFG is shown in Figure 17-17 and described in Table 17-36.

Trigger Counter Configuration

Figure 17-17. TRIGCNTCFG Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

RESERVED

R-X

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RESERVED EN

R-X R/W-X

Table 17-36. TRIGCNTCFG Register Field Descriptions

Bit Field Type Reset Description

31-1 RESERVED R X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

0 EN R/W X

Stop counter enable 0: Stop counter is disabled 1: Stop counter is

enabled

1231

SWCU117A–February 2015–Revised March 2015 AUX – Sensor Controller with Digital and Analog Peripherals

Submit Documentation Feedback