User manual

AUX – Sensor Controller Registers

www.ti.com

17.8.1.5 GPIODOUTCLR Register (Offset = 10h) [reset = X]

GPIODOUTCLR is shown in Figure 17-7 and described in Table 17-25.

General Purpose Input Output Data Out Clear Strobes for clearing output data register bits

Figure 17-7. GPIODOUTCLR Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RESERVED IO7_0

R-X R/W-X

Table 17-25. GPIODOUTCLR Register Field Descriptions

Bit Field Type Reset Description

31-8 RESERVED R X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

7-0 IO7_0 R/W X

Writing 1(s) to one or more bit positions clears the corresponding

bit(s) in GPIODOUT. Read value is 0x00.

1218

AUX – Sensor Controller with Digital and Analog Peripherals SWCU117A–February 2015–Revised March 2015

Submit Documentation Feedback