User manual

AUX – Sensor Controller Registers www.ti.com
17.8.1.3 GPIODIN Register (Offset = 8h) [reset = X]
GPIODIN is shown in Figure 17-5 and described in Table 17-23.
General Purpose Input Output Data In
Figure 17-5. GPIODIN Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESERVED IO7_0
R-X R-X
Table 17-23. GPIODIN Register Field Descriptions
Bit Field Type Reset Description
31-8 RESERVED R X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
7-0 IO7_0 R X
Input values for AUXIO0 through AUXIO7 (for AIODIO0) or AUXIO8
through AUXIO15 (for AIODIO1).
1216
AUX – Sensor Controller with Digital and Analog Peripherals SWCU117A–February 2015–Revised March 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated