User manual

www.ti.com

AUX – Sensor Controller Registers

17.8.1.1 GPIODOUT Register (Offset = 0h) [reset = X]

GPIODOUT is shown in Figure 17-3 and described in Table 17-21.

General Purpose Input/Output Data Out This register is used to set data on the pads assigned to AUX

Figure 17-3. GPIODOUT Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RESERVED IO7_0

R-X R/W-X

Table 17-21. GPIODOUT Register Field Descriptions

Bit Field Type Reset Description

31-8 RESERVED R X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

7-0 IO7_0 R/W X

Output values for AUXIO0 through AUXIO7 (for AIODIO0) or

AUXIO8 through AUXIO15 (for AIODIO1).

1213

SWCU117A–February 2015–Revised March 2015 AUX – Sensor Controller with Digital and Analog Peripherals

Submit Documentation Feedback