User manual

General-Purpose Timer Registers

www.ti.com

13.5.1.23 TAPS Register (Offset = 5Ch) [reset = X]

TAPS is shown in Figure 13-31 and described in Table 13-30.

Timer A Pre-scale Snap-shot This register shows the current value of the Timer A pre-scaler in the 16-bit

mode. Note: When the alternate timer clock (TIMCLK) is enabled; a read of a timer value will return the

current count -1.

Figure 13-31. TAPS Register

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RESERVED PSS

R-X R-X

Table 13-30. TAPS Register Field Descriptions

Bit Field Type Reset Description

31-16 RESERVED R X

Software should not rely on the value of a reserved. Writing any

other value than the reset value may result in undefined behavior.

15-0 PSS R X

GPT Timer A Pre-scaler

1116

Timers SWCU117A–February 2015–Revised March 2015

Submit Documentation Feedback