User manual

www.ti.com General-Purpose Timer Registers
13.5.1.5 SYNC Register (Offset = 10h) [reset = X]
SYNC is shown in Figure 13-13 and described in Table 13-12.
Synch Register
Figure 13-13. SYNC Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RESERVED
R-X
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RESERVED SYNC3 SYNC2 SYNC1 SYNC0
R-X W-X W-X W-X W-X
Table 13-12. SYNC Register Field Descriptions
Bit Field Type Reset Description
31-8 RESERVED R X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
7-6 SYNC3 W X
Synchronize GPT Timer 3.
0h = No Sync. GPT3 is not affected.
1h = A timeout event for Timer A of GPT3 is triggered
2h = A timeout event for Timer B of GPT3 is triggered
3h = A timeout event for both Timer A and Timer B of GPT3 is
triggered
5-4 SYNC2 W X
Synchronize GPT Timer 2.
0h = No Sync. GPT2 is not affected.
1h = A timeout event for Timer A of GPT2 is triggered
2h = A timeout event for Timer B of GPT2 is triggered
3h = A timeout event for both Timer A and Timer B of GPT2 is
triggered
3-2 SYNC1 W X
Synchronize GPT Timer 1
0h = No Sync. GPT1 is not affected.
1h = A timeout event for Timer A of GPT1 is triggered
2h = A timeout event for Timer B of GPT1 is triggered
3h = A timeout event for both Timer A and Timer B of GPT1 is
triggered
1-0 SYNC0 W X
Synchronize GPT Timer 0
0h = No Sync. GPT0 is not affected.
1h = A timeout event for Timer A of GPT0 is triggered
2h = A timeout event for Timer B of GPT0 is triggered
3h = A timeout event for both Timer A and Timer B of GPT0 is
triggered
1095
SWCU117A–February 2015–Revised March 2015 Timers
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated