User manual

swru209
b
9
/
28
PC. SmartRF Studio also offers a flexible code exp
ort function of radio register settings for software
developers.
Before proceeding, please download and install the latest version of SmartRF Studio from the web
[2]
.
By installing Studio, the USB drivers needed for proper interaction between the PC and the hardware
of the CC2530DK will also be installed.
In order to use the SmartRF Studio with CC2530, connect the CC2530EM to the SmartRF05EB. Next,
connect the Smar
tRF05EB board to the PC via one of the USB cables included in the kit. If you have
installed SmartRF Studio, select automatic installation of driver in the device wizard that appears. The
device wizard will only pop up when you turn on the SmartRF05EB and
only once for each board.
Allow Windows to complete the driver installation before proceeding.
With the board connected to the PC, you can start SmartRF Studio. The following window should
appear:
Figure
3
-
CC2530 and SmartRF
Studio
Make sure you select the tab called
“2.4 GHz”. The tab will indicate if there is a board/device
connected, and you should see the CC2530 icon highlighted as in the screenshot above.
Double click
on the
CC2530 icon, and
a new window will appear.