Datasheet

BUF22821EVM-USB Hardware www.ti.com
3.6 BUF22821EVM-USB Default Jumper Settings
Figure 9 shows the default jumpers configuration for the BUF22821EVM-USB. In general, the jumper
settings of the USB_DIG_Platform do not need to be changed. You may want to change some of the
jumpers on the BUF22821 Test Board to match your specific configuration. For instance, you may wish to
set a specific I
2
C address.
Figure 9. Default Jumper Locations for BUF22821EVM-USB
10
BUF22821EVM-USB Evaluation Board and Software Tutorial SBOU117–September 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated