Datasheet

BUF18830EVM Documentation

www.ti.com

6.3 Bill of Materials

Table 5 lists the bill of materials for the BUF18830EVM.

Table 5. Bill of Materials

Item No Count Value RefDes Description Mfr Part Number

1 2 10Ω R1, R4 Resistor, 10Ω 1/16W .5% 0603 SMD Susumu Co Ltd RR0816Q-100-D

2 2 10kΩ R2, R5 Resistor, 10.0kΩ 1/16W .5% 0603 SMD Susumu Co Ltd RR0816P-2493-D-39D

3 2 1kΩ R3, R6 Resistor, 1.0kΩ 1/16W .5% 0603 SMD Susumu Co Ltd RR0816P-102-D

4 14 0.1μF C1-C14 Capacitor, .10μF 25V Ceramic Y5V 0603 Kemet C0603C104Z3VACTU

5 3 4.7μF C15, C17,C19 Capacitor, Tantalum 4.7μF 35V 10% Vishay/Sprague 293D475X9035C2TE3

SMD

6 3 1μF C16, C18, C20 Capacitor, Ceramic 1μF 25V Y5V 0603 Murata Electronics North GRM188F51E105ZA12D

America

7 1 U1 Socket, TSSOP 38-Pin ZIF ENPLAS OTS-38(28)-0.65-01

8 2 U2 Connector, RCPT .100" 19-Position Gold Samtec Inc SS-119-G-2

T/H, **See Assembly Drawing, **See

Note 4

9 1 DSUB25 M J1 Connector, D-SUB PLUG R/A AMP/Tyco Electronics 5747842-4

25-Position 30GOLD (with threaded

inserts and board locks)

10 3 T1, T4, T6 Terminal Block, 5MM 2-Position On-Shore Technology Inc ED300/2

11 1 T2 Terminal Block, 5MM 3-Position On-Shore Technology Inc ED300/3

12 1 Strip cut to TPG1 Connector, Header 22-Position .100" Samtec TSW-122-07-G-S

size (length SGL Gold **See Note 2

is 22 pos.)

13 8 TP cut to Test Points, All Connector, Header 1-Position .100" SGL Samtec TSW-101-07-G-S

size (length Gold **See Note 2

is 1 pos.)

14 4 Standoff None Standoffs, Hex , 4-40 Threaded, 0.500" Keystone 2203

length, 0.250" OD, Aluminum Iridite

Finish

15 4 Screw None Screw Machine Phillips 4-40 × 1/4 SS B & F Fastener Supply PMSSS 440 0025 PH

16 3 Strip cut to JMP1-JMP3 Connector, Header 3-Position .100" SGL Samtec TSW-103-07-G-S

size (length Gold **See Note 2

is 3 pos.)

17 3 Jumper JMP1-JMP3 Shunt LP w/Handle 2-Position 30AU AMP/Tyco Electronics 881545-2

BUF18830EVM User Guide and Software Tutorial SBOU103–April 2011

Submit Documentation Feedback