Datasheet

Default
Jumpers
www.ti.com BUF18830EVM Hardware Overview
3.6 BUF18830EVM Default Jumper Settings
Figure 9 shows the default jumper configuration for the BUF18830EVM. In general, the jumper settings of
the USB_DIG_Platform will not need to be changed. You may want to change some of the jumpers on the
BUF18830EVM board to match your specific configuration. For example, you may wish to set a specific
I
2
C address.
Figure 9. BUF18830EVM Default Jumper Settings
11
SBOU103–April 2011 BUF18830EVM User Guide and Software Tutorial
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated