Datasheet

BUF16821EVM-USB Software Overview

www.ti.com

5.2.9 Run Batch Button

The Run Batch button (as highlighted in Figure 22) enables the user to configure the BUF16821 to cycle

through different register configurations in a continuous loop. When connected to the end application, this

feature can be used to cycle through different gamma settings to determine what the optimal settings must

be for a given application.

When the Run Batch button is pressed, a new dialog box displays as Figure 22 shows. The delay time is

the amount of time allowed between loading new configurations into the BUF16821 DUT.

Use the Single Step Up and Single Step Down buttons to step through the selected files manually. The

currently-selected file name is displayed in the lower left corner area of the dialog box. Double-click on the

file names to select them. Once a series of filenames have been selected, the check box turns dark.

Double-click on a filename again to unselect it from the batch run.

Figure 22. Run Batch Dialog Button and Window

BUF16821EVM-USB Evaluation Board and Software Tutorial SBOU106– May 2011

Submit Documentation Feedback