Datasheet

BUF12800EVM Documentation

www.ti.com

7.3 Bill of Materials

Table 6 lists the bill of materials for the BUF12800EVM.

Table 6. BUF12800EVM Test Board Bill of Materials

Item

No. Qty Value Ref Des Description Vendor/Mfr Part Number

1 4 Various R1 to R4 Resistor, 1/16W 5% 0603 SMD Susumu Co Ltd Various

2 2 4.7 μF C1, C2 Capacitor, tantalum, 4.7 μF 35 V Vishay/Sprague 293D475X9035C2TE3

10% SMD

3 2 1 μF C3, C4 Capacitor, ceramic, 1 μF 25 V X7R Murata Electronics North GRM188F51E105ZA12D

0402 America

4 6 0.1 μF C5 to C10 Capacitor ceramic, 0.1 μF 25 V Kemet C0603C104Z3VACTU

Y5V 0603

5 1 — U1 Connector, Rcpt .100 in, 12-Pos Samtec SS-112-G-2

Gold T/H

6 2 — U2 Socket, TSSOP 24-Pin ZIF ENPLAS OTS-24(28)-0.65-02-00

7 1 DSUB 25M J1 Connector, D-SUB Plug R/A AMP/Tyco Electronics 5747842-4

25-Pos 30 Gold (with threaded

inserts and board locks)

8 4 — T1 to T4 Terminal block 5 MM 2 Pos On-Shore Technology ED300/2

Inc

9 1 — T5 Terminal block 5 MM 3 Pos On-Shore Technology ED300/3

Inc

10 1 — TP1 Connector, Header 12-Pos .100 Samtec TSW-112-07-G-S

in., SGL Gold

11 6 — All Test Points Connector, Header 1-Pos .100 in., Samtec TSW-101-07-G-S

, V

, SCL, SGL Gold

SDA, LD, GND)

12 4 Standoff None Standoffs, Hex , 4-40 Threaded, Keystone 2203

0.500 in., length, 0.250 in. OD,

Aluminum Iridite Finish

13 4 Screw None Screw Machine Phillips, 4-40X1/4 B & F Fastener Supply PMSSS 440 0025 PH

14 8 Strip cut to JMP1 to JMP8 Connector, Header 3-Pos .100 in., Samtec TSW-103-07-G-S

size (length SGL Gold

is 3 pos.)

15 8 Jumper JMP1 to JMP8 Shunt LP w/Handle 2-Pos 30AU AMP/Tyco Electronics 881545-2

BUF12800EVM Evaluation Board and Software Tutorial SBOU116–September 2011

Submit Documentation Feedback