Datasheet

BUF08832EVM Hardware Setup www.ti.com
1.2 Related Documentation from Texas Instruments
The following documents provide information regarding Texas Instruments' integrated circuits used in the
assembly of the BUF08832EVM. This user's guide is available from the TI web site under literature
number SBOU081. Any letter appended to the literature number corresponds to the document revision
that is current at the time of the writing of this document. Newer revisions may be available from the TI
web site, or call the Texas Instruments' Literature Response Center at [phone] or the Product
Information Center at (972) 644- 5580. When ordering, identify the document by both title and literature
number.
Related Documentation
Document Literature Number
BUF08832 Product Data Sheet SBOS476
USB DIG Platform Users Guide SBOU058
2 BUF08832EVM Hardware Setup
Figure 2 shows the system setup for the BUF08832EVM. The PC runs software that communicates with
the USB DIG Platform. The USB DIG Platform generates the analog and digital signals used to
communicate with the BUF08832_Test_Board. Connectors on the BUF08832_Test_Board allow the user
to connect to the device under test (DUT), in order to monitor the power, current, and voltage of the
BUF08832 DUT.
Figure 2. BUF08832EVM Hardware Setup
4
BUF08832EVM User Guide and Software Tutorial SBOU081–November 2009
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated