Datasheet

+6V dc wall
supply
BUF08821
Test Board
Analog Supply
USB Dig Platform
Outputs
Measurement
Device
www.ti.com BUF08821EVM-USB Hardware Setup
1.2 Related Documentation from Texas Instruments
The following documents provide information regarding Texas Instruments' integrated circuits used in the
assembly of the BUF08821EVM-USB. This user's guide is available from the TI web site under literature
number SBOU095. Any letter appended to the literature number corresponds to the document revision
that is current at the time of the writing of this document. Newer revisions may be available from the TI
web site, or call the Texas Instruments' Literature Response Center at [phone] or the Product
Information Center at [phone]. When ordering, identify the document by both title and literature
number.
Related Documentation
Document Literature Number
BUF08821 Product Data Sheet SBOS438
USB_DIG_Platform User Guide SBOU058
2 BUF08821EVM-USB Hardware Setup
Figure 2 shows the system setup for the BUF08821EVM-USB. The PC runs software that communicates
with the USB_DIG_Platform. The USB_DIG_Platform generates the analog and digital signals used to
communicate with the BUF088821. Connectors on the BUF08821 allow the user to connect to the device
under test (DUT), in order to monitor the power, current, and voltage of the DUT.
Figure 2. BUF08821EVM-USB Hardware Setup
3
SBOU095–March 2011 BUF08821EVM-USB User Guide and Software Tutorial
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated